PART 2: Binary And Digital Operations (PDF)

In this book (PART 2) we will get familiar with basic binary and digital operations that enable us to create a basic program within the requirements of an actual problem (with Siemens S7-1500 and S7-1200 PLC and TIA Portal). In this book we will also cover the basics of program blocks and how to organize our code within these blocks.

Table of Content:

• LESSON 1: START NEW PROJECT
  
• EXAMPLE 1: HW configuration from project documentation
  
• TASK 1: Insert our devices
• TASK 2: PLC configuration
• TASK 3: Configuring digital inputs
• TASK 4: Configuring digital outputs
• TASK 5: Configuring analog inputs
• TASK 6: Configuring analog outputs
• TASK 7: HMI Configuration
• TASK 8: Configuring frequency converters (drives)
• TASK 9: Configuring PLC Tag Tables and signal names
• TASK 10: Downloading HW and SW
• LESSON 2: TEST HARDWARE CONFIGURATION
  
• EXAMPLE 2: I/O check
  
• TASK 1: Checking digital inputs
• TASK 2: Checking analog inputs
• TASK 3: Checking digital outputs
• TASK 4: Checking analog outputs
• LESSON 3: BASIC PLC COMMANDS
  
• EXAMPLE 3: Binary operations / instructions / commands
  
• TASK 1: Organize your Favorite instructions
• TASK 2: AND, OR and XOR operations
• TASK 3: NOT instruction
• TASK 4: SET and RESET instructions
• TASK 5: Jump instructions
• EXAMPLE 4: Simple program – part 1
  
• TASK 1: Creating, using and renaming PLC tags in “Functions”
• TASK 2: On-line monitoring and modifying tag values
• EXAMPLE 5: Simple program – part 2
  
• TASK 1: Using SET and RESET in our program
• EXAMPLE 6: Simple program – part 3
  
• EXAMPLE 7: Simple program – part 4
  
• LESSON 4: INTERMEDIATE PLC COMMANDS
  
• EXAMPLE 8: Digital operations
  
• TASK 1: Prepare data for the PLC Tag Table
• TASK 2: The ADD instruction
• TASK 3: DIV and MUL instructions
• TASK 4: Data type conversion
• TASK 5: The CALCULATE instruction
• TASK 6: Comparator instructions
• TASK 7: The INC instruction
• TASK 8: The MOVE instruction
• TASK 9: The CTU instruction
• TASK 10: The TON instruction
• EXAMPLE 9: Intermediate program – part 1
  
• EXAMPLE 10: Intermediate program – part 2
  
• EXAMPLE 11: Intermediate program – part 3
  
• TASK 1: Creating a periodic signal with a different ON and OFF time duration
• TASK 2: Creating Toggle
• LESSON 5: COMBINING THE BASIC AND INTERMEDIATE PLC COMMANDS
  
• EXAMPLE 12: Create our new project
  
• EXAMPLE 13: Write code based on functional specifications
  
• EXAMPLE 14: Modify our program
  
• LESSON 6: WRITING YOUR CODE IN A MORE STRUCTURAL WAY
  
• EXAMPLE 15: Let us clean up / organize our code
  
• TASK 1: Creating a new function
• TASK 2: Call our function
• LESSON 7: ADVANCED PLC COMMANDS
  
• EXAMPLE 16: The PID regulator
  
• TASK 1: Add an organisation block, where we call the PID instruction
• TASK 2: Insert the PID instruction
• TASK 3: Prepare the data and connect it to the PID instruction using a link
• TASK 4: PID configuration
• TASK 5: PID commissioning
• EXAMPLE 17: The PID pulse regulator
  
• TASK 1: The compact PID regulator with PULSEGEN
• TASK 2: The TCONT_CP regulator
• EXAMPLE 18: PUT/GET instructions
  
• TASK 1: Enable PUT/GET instructions
• TASK 2: Connecting two PLCs
• TASK 3: Prepare data
• TASK 4: Insert a PUT instruction
• TASK 5: Configure a PUT instruction